1 1

SpecChem Surface Shine HS

SpecChem Surface Shine HS

REQUEST QUOTATION

Contractor Overview

Surface Shine HS Surface Shine HS is a durable, high-gloss acrylic sealer that enhances and protects concrete surfaces while resisting yellowing, abrasion, and chemical impacts. Surface Shine HS is a high-solids, high-gloss, non-yellowing acrylic polymer designed as a cure and seal for exterior surfaces including exposed aggregate, natural stone, brick, quarry tile, terrazzo, and concrete.

Best For

  • Fresh concrete curing
  • Horizontal and vertical concrete surfaces
  • Flatwork, paving, and slab protection

Key Features

  • Concrete curing support
  • Designed to help protect fresh concrete during early cure

Material & Application Notes

Surface Shine HS Surface Shine HS is a durable, high-gloss acrylic sealer that enhances and protects concrete surfaces while resisting yellowing, abrasion, and chemical impacts. Surface Shine HS is a high-solids, high-gloss, non-yellowing acrylic polymer designed as a cure and seal for exterior surfaces including exposed aggregate, natural stone, brick, quarry tile, terrazzo, and concrete. This durable sealer enhances the appearance of all treated surfaces by providing a high gloss finish.

Why Contractors Choose It

Contractors choose Surface Shine HS when fresh concrete needs curing support, surface protection, and a cleaner finished slab appearance.

View full details

Application

Surface Preparation

The concrete surface must be clean and devoid of any standing water. Any existing sealer or other materials that might inhibit the adhesion ofSurface Shine HSshould be removed.

Application Instructions

For Fresh Concrete

  • Apply uniformly by spraying or rolling at350400 sq ft per gallon.
  • Use a handheld pump-up sprayer or an airless industrial sprayer.
  • For roller application, use a short-nap solvent-resistant sleeve to prevent air bubbles.
  • For an extra high gloss or on porous surfaces, a second thin application may be applied the following day at400 sq ft per gallon.
  • Two thin coats generally yield a better gloss than one thick coat.

For Existing Concrete

Ensure the surface is clean, dry, and free of stains, oil, grease, dirt, and incompatible coatings before application.

Packaging

Available in 55-gallon drums and 5-gallon pails.

Shelf Life

Surface Shine HS has a shelf life of two years from the date of manufacture, in its original, tightly closed containers. Avoid contamination with water, dirt, or other foreign substances.

Coverage

  • Concrete:200 400 sq ft per gallon
  • Exposed aggregate:200 300 sq ft per gallon
  • Brick, stucco, etc.:200 300 sq ft per gallon

Standards

  • MeetsASTM C-1315-95, Type I
  • V.O.C. Content:Less than 700 g/L
  • Complies with Federal V.O.C. standards for curing and sealing compounds.
  • Do not dilute or thin the product.

Cleaning

Application equipment should be cleaned immediately using xylene or another approved solvent.