Surface Preparation

For optimal adhesion and performance, the concrete substrate should be free of contaminants and either clean and dry or slightly damp. Dense, hard-troweled concrete should be profiled or roughened to enhance adhesion.

Application Instructions

• Ready to use; do not dilute.
• Apply with a sprayer for uniform thin films, which is the preferred method for best results.
• Apply two thin coats, allowing the first coat to thoroughly dry before applying the second.
• Never apply one heavy coat to avoid puddles.

• Coverage for curing:300 400 sq ft/gal
• Coverage for dustproofing and sealing:400 600 sq ft/gal

For New Concrete

Apply as soon as surface water has evaporated and the surface can be worked without being marred. Apply in a uniform coat, and for enhanced protection and finish, a second coat can be applied at400 sq ft per gallon.

For Existing Concrete

Ensure the surface is clean, dry, or damp, and free from stains, oil, grease, dirt, and incompatible coatings. Application will enhance the appearance of existing concrete, brick, or terrazzo floors, making them brighter and easier to maintain.

Available in 5 gallon pails.

Two years from the date of manufacture when stored in original tightly closed containers. Avoid accumulation of water, dirt, or other contaminants.

• MeetsASTM C-1315andASTM C 309, Type 1, Classes A & B.
• VOC content:Less than 700 g/L, complying with EPA limits and regional standards for curing and sealing compounds.