1 1

SpecChem SpecPoxy 3000 FS

SpecChem SpecPoxy 3000 FS

REQUEST QUOTATION

Fast-setting ASTM 881 compliant hi-mod, gel viscosity epoxy

SpecPoxy 3000 FS is a two-component, moisture insensitive, high modulus, structural epoxy bonding gel. This product is 100% solids, solvent-free, low odor, high strength, and non-sag, making it ideal for various structural bonding and patching applications.

  • Fast-setting: Gel time of only 10 minutes.
  • Versatile Application: Can be used for both vertical and overhead applications due to its gel/paste viscosity.
  • ASTM Compliance: ASTM 881 compliant for high-modulus applications.
  • Quick Turnaround: Ideal for environments requiring fast return to service.
View full details

Application

  • Anchoring:Bolts, dowels, and reinforcing steel.
  • Structural Bonding and Patching:Suitable for vertical and overhead applications.
  • Crack Sealing:Sealing of cracks and setting of injection ports.
  • Substrate Compatibility:Applicable to concrete, block, brick, or stone.
  • VOC Compliance:0 grams per liter, environmentally safe.

Mixing Instructions

  • Mix equal volumes of Part A and Part B for three minutes using a low-speed drill.
  • Ensure air, material, and surface temperatures are above 40°F (4°C) before mixing.

Surface Preparation

  • Surfaces must be clean, dry, and structurally sound.
  • Remove all contaminants by sandblasting, mechanical abrasion, or hydroblasting.
  • Clean drilled holes with a nylon brush and oil-free compressed air.

Application Techniques

  • Bonding:Apply SpecPoxy 3000 FS neatly into the substrate. Do not exceed a glue line thickness of 1/8”.
  • Anchoring:Prepare holes and insert bolts or dowels while the epoxy remains tacky.

Packaging

Available in 1 gallon units, 2 gallon units, 10 gallon units, and 22 oz. dual cartridges.

Shelf Life

Store in original, tightly closed containers. Properly stored, the shelf life is two years from the date of manufacture.

Test Data

  • ASTM Compliance:Meets ASTM C881, Type I, II, IV, and V, Grade 3, Classes B & C.
  • Initial Cure:4 hours
  • Final Cure:3 days
  • Compressive Strength (ASTM D695):12,250 psi
  • Compressive Modulus (ASTM D695):435,000 psi
  • Bond Strength (ASTM C882):2 days 2,810 psi14 days 3,410 psi
  • Elongation (ASTM D638):1.1%
  • Tensile Strength (ASTM D638):7,460 psi
  • Water Absorption (ASTM D570):0.5%
  • Linear Shrinkage (ASTM C531):0.004%
  • Heat Deflection (ASTM D648):151°F

Standards

  • ASTM Compliance:Meets ASTM C881, Type I, II, IV, and V, Grade 3, Classes B & C.