1 1

SpecChem SpecPoxy 3000

SpecChem SpecPoxy 3000

REQUEST QUOTATION

ASTM 881 Compliant Hi-Mod, Gel Viscosity Epoxy

SpecPoxy 3000 is a two-component, moisture-insensitive, high-modulus structural epoxy bonding gel. This product is 100% solids, solvent-free, low-odor, high-strength, and non-sag, suitable for anchoring and bonding in construction applications. Its VOC content is 0 grams per liter, emphasizing its environmental safety.

  • Extended working time, allowing for careful application.
  • Pick-proof sealant, ideal for security-sensitive environments.
  • ASTM 881 compliant, high-modulus, gel-viscosity epoxy.
  • Suitable for a variety of substrates, providing flexibility in application.
View full details

Application

  • Anchoring bolts, dowels, and reinforcing steel.
  • Vertical and overhead structural bonding and patching.
  • Sealing cracks and setting injection ports.
  • Suitable for use in concrete, block, brick, or stone.

Mixing Instructions

  • Mix equal volumes of Part A and Part B for three minutes using a low-speed drill.
  • Air, material, and surface temperatures must be at least 60°F prior to mixing and installation.

Surface Preparation

  • Surfaces must be clean and structurally sound.
  • Remove contaminants by sandblasting, mechanical abrasion, or hydroblasting.
  • Ensure drilled holes are prepared by brushing and blowing out with oil-free compressed air.

Application Techniques

  • Bonding:Apply SpecPoxy 3000 neatly into the substrate and ensure the glue line does not exceed 1/8″.
  • Anchoring:For anchoring applications, ensure holes are drilled to the appropriate depth and diameter, and filled from the bottom up to avoid air pockets.

Packaging

Available in 1 gallon units, 2 gallon units, 10 gallon units, and 22 oz. dual cartridges.

Shelf Life

Store in original, tightly closed containers. Shelf life is two years from the date of manufacture when stored properly.

Test Data

  • Initial Cure:24 hours
  • Final Cure:7 days
  • Compressive Strength (ASTM D695):11,230 psi
  • Compressive Modulus (ASTM D695):326,500 psi
  • Bond Strength (ASTM 882):2 days 2,460 psi14 days 3,280 psi
  • Elongation (ASTM D638):1.3%
  • Tensile Strength (ASTM D638):7,210 psi
  • Water Absorption (ASTM D570):0.5%
  • Heat Deflection (ASTM D648):133°F
  • Mix Ratio:1 to 1
  • Viscosity:Gel/Paste