1 1

SpecChem Por-Rok Aqua Plug

SpecChem Por-Rok Aqua Plug

REQUEST QUOTATION

Contractor Overview

Por-Rok Aqua Plug is a metallic cement-based grout. Rapid Setting Cement Based Hydraulic Cement Por-Rok® Aqua Plug is a quick-setting hydraulic cement that sets in 3-5 minutes, designed to stop pressure leaks in concrete and masonry. It bonds both mechanically and chemically to saturated surfaces, making it ideal for: Stopping streaming leaks in concrete Anchoring bolts and rods Sealing cracks and floor/wall junctions Non-metallic, non-rusting Fast setting and.

Best For

  • Masonry

Key Features

  • Cement-based grout formulation
  • Designed for load-bearing support applications

Material & Application Notes

Set forms tight and secure before placement. Remove loose material, rust, oil, grease, and standing water from contact surfaces. Maintain continuous placement to reduce voids and air pockets.

Why Contractors Choose It

Contractors choose Por-Rok Aqua Plug when the job calls for dependable bearing support, positive placement, and a grout that can be matched to real equipment or base plate conditions.

View full details

Application

Surface Preparation

Undercut or enlarge holes and cracks slightly to allow for material embedment. Recommended dimensions are at least 0.75 inches wide and deep. Remove all loose dirt and aggregate, and ensure surfaces are saturated surface dry (SSD) prior to application.

Mixing and Application

Mix Por-Rok® Aqua Plug with clean, potable water to achieve a putty consistency. The water ratio should be 3 parts powder to 1 part water. Mix only small quantities at a time due to the rapid setting time.

Application Techniques

  • Stopping Streaming Water:Begin at the top of the crack and firmly press the mixed material into the opening, applying pressure until the material sets and the leak stops.
  • Sealing Cracks and Floor/Wall Junctions:Firmly press Por-Rok® Aqua Plug into the crack or hole to form a cove at the floor and wall junction.
  • Anchoring Bolts or Rods:Drill or chisel a hole deep enough to securely hold the bolt or rod with at least ½ inch of space around. Insert the bolt, fill the space with Por-Rok® Aqua Plug, and smooth the surface, supporting the bolt until the material sets.

Packaging

50 lb bag yields approximately 0.50 cubic feet.

Shelf Life

12 months when stored properly in a dry area

Test Data

  • Compressive Strength (ASTM C109):

Standards

ASTM C-1107, CRD-C 621-89, ASTM C-109, ASTM C-266, ASTM C-232, ASTM C-827-82, ASTM C-942