Underwater Repairs:

• Prepare the area by wire brushing to remove loose or flaking material.
• Undercut the repair area for maximum bond strength.
• Mix Pool Patch with clean water to achieve a putty-like consistency.
• Apply with a gloved hand, pressing into cracks or holes until it sets.

Above-Water Repairs:

• Undercut and clean the substrate, ensuring a depth and width of at least 1 inch.
• Remove contaminants like oil, grease, and dirt using industrial detergents.
• Mix the product and apply with a trowel. Shape and smooth to match the surrounding surface.
• Allow repaired areas to cure for at least 1 hour before covering with a cementitious coating.

Important Notes:

• Do not apply to frozen surfaces or in temperatures below 35°F.
• Avoid mixing more material than can be placed within 10 minutes.

Mixing Instructions

• Mix 3 parts powder to 1 part clean, potable water.
• Ensure the substrate is saturated surface dry (SSD) before application.
• Prepare only small batches to ensure usability within the rapid set time.

Available in:

• 50-lb. bags for large-scale applications.
• 5-gallon pails for smaller repairs

• Store in a cool, dry place, away from direct sunlight.
• Tightly seal the package when not in use.
• Shelf life is 12 months when properly stored. Rotate stock regularly.

• Compressive Strength (ASTM C109):
• Yield/Density:A 50-lb. bag yields approximately 0.50 ft³.

• Clean tools and mixing equipment with water immediately after use.
• Hardened material must be removed mechanically.