Max-A-Seal Asphalt Paint must be applied to a clean, dry surface free of foreign matter. The material can be applied by brush, heavy nap roller, or spray equipment at a recommended minimum wet mil thickness of 5 mils at 250-300 ft²/gal. It dries within an hour and can be recoated or backfilled within 5 hours at 70°F. The product can be sprayed using a Graco GH833 Siphon Pump, 1/2” hose, Blue Texture Spray gun, and a GHD 661 Spray Tip, among other comparable brand spraying equipment. Material should remain dry until it has fully cured.

• 1 gallon cans (3.8 L)
• 5 gallon pails (18.9 L)
• 55 gallon drums (208.2 L)

The shelf life of Max-A-Seal Asphalt Paint in the original, tightly closed container is 1 year from the date of manufacture. Do not store at temperatures exceeding 110°F.

This product is excellent for painting metal, masonry, concrete pipe, and wood surfaces, both inside and out, where a corrosion-resistant black protective coating is desired. It is particularly effective in stormwater immersion scenarios and approved for use in stormwater wet wells, pump stations, manholes, and for acid/corrosion protection. It withstands a pH range of 3-10 and is ideal for:

• Above/Below ground pipelines and valves
• Exposed steel in corrosive environments
• Metal natural gas piping
• Storage tanks/grease traps
• Concrete and concrete pipe
• Iron manhole covers
• Steel to be embedded in concrete
• Burial vaults

• Appearance:Glossy Black
• Solids (%):>70% by weight (ASTM C1250)
• Density:7.5 lbs/gal
• Viscosity SFS @ 122°F:135 cps
• Application Methods:Airless spray, brush
• Cure/Backfill Time:5 hours
• Dry Time:1 hour
• Application Temperature Range:35°F and above
• Flash Point:110°F (ASTM D 92)