1 1

SpecChem Final Finish

SpecChem Final Finish

REQUEST QUOTATION

Contractor Overview

Final Finish is a polymer-modified concrete resurfacing and repair mortar. Rapid-Hardening, Polymer-Modified Concrete Resurfacer Final Finish is a one-component, rapid-hardening, polymer-modified, concrete resurfacing mortar, designed for smoothing, resurfacing, rubbing, and restoring concrete surfaces. This product combines a long pot life with rapid hardening to minimize waste and labor.

Best For

  • Tilt-up
  • Vertical
  • Overhead
  • Horizontal

Key Features

  • One-component, rapid-hardening, polymer-modified, concrete resurfacing mortar, designed for smoothing, resurfacing, rubbing, and restoring concrete surfaces
  • Concrete repair formulation
  • Built for professional patching and restoration work

Material & Application Notes

Rapid-Hardening, Polymer-Modified Concrete Resurfacer Final Finish is a one-component, rapid-hardening, polymer-modified, concrete resurfacing mortar, designed for smoothing, resurfacing, rubbing, and restoring concrete surfaces. Final Finish is highly durable and suitable for all interior and exterior applications on horizontal, vertical, and overhead surfaces. It can also serve as a skim patch or trowel-down underlayment for light traffic areas up to 1/4 inch.

Why Contractors Choose It

Contractors choose Final Finish when the repair needs to hold up, finish cleanly, and fit the job condition without slowing down the crew.

View full details

Application

Surface Preparation

  • Clean the Surface:Ensure the concrete is free from oil, grease, dust, laitance, or other contaminants.
  • Pre-Dampening:For porous or hot/dry substrates, pre-dampen the surface to a saturated-surface-dry (SSD) condition with no standing water.

Mixing and Application

  • Mixing Instructions:Final Finish may be mixed by hand or with a low-speed drill. Add approximately 16 pints (2.0 gallons) of water per 40 lb pail (around 41% by weight). Mix for 23 minutes until smooth. Cover with a damp rag to extend pot life up to 3 hours at 72°F. Avoid overmixing or retempering.
  • Application Trowel or Sponge Float:Apply with pressure to fill cracks, voids, and honeycombs. For applications thicker than 1/4”, use Overcrete.
  • Application Wall Surfaces:Fill low areas with SpecPatch or Overcrete. Apply a thin, uniform coat of Final Finish with a trowel or sponge float. A second coat may be applied before full cure if necessary. Avoid extreme weather conditions during application.

Curing Process

  • Cure Time:Final Finish cures fully in 24 hours.
  • Protection:Shield from rain or water exposure until fully cured.

Packaging

Available in 15 lb pails, 40 lb bags (60 bags per pallet), and 40 lb pails (36 pails per pallet).

Shelf Life

Unopened pails have an 18-month shelf life when stored in dry conditions. Avoid extreme temperatures and high humidity. Store in a cool, dry place away from direct sunlight.

Coverage

Coverage is approximately 120 sq ft per 40 lbs at 1/16 inch thickness.

Test Data

  • Pot Life at 72°F:Up to 3 hours
  • Compressive Strength (28 Days):1500 psi
  • Color:Light Gray

Cleaning

Tools and equipment should be cleaned with water before the material hardens.