1 1

SpecChem E-Cure

SpecChem E-Cure

REQUEST QUOTATION

Contractor Overview

E-Cure is a concrete curing compound or cure-and-seal. Water-based concrete curing compound E-CureĀ® is a cutting-edge, clear concrete curing compound that addresses compatibility issues with flooring adhesives. It is designed for spray application to cure, harden, and dustproof concrete, ensuring proper strength development.

Best For

  • Fresh concrete curing
  • Horizontal and vertical concrete surfaces
  • Flatwork, paving, and slab protection

Key Features

  • Water-based concrete curing compound E-CureĀ® is a cutting-edge, clear concrete curing compound that addresses compatibility issues with flooring adhesives
  • VOC regulations
  • VOC emissions

Material & Application Notes

Water-based concrete curing compound E-CureĀ® is a cutting-edge, clear concrete curing compound that addresses compatibility issues with flooring adhesives. It is designed for spray application to cure, harden, and dustproof concrete, ensuring proper strength development. E-CureĀ® creates a temporary membrane to enhance the concreteā€™s durability and is compatible with ASTM C309 Type 1D, Class A & B standards for moisture retention on hard-troweled surfaces.

Why Contractors Choose It

Contractors choose E-Cure when fresh concrete needs curing support, surface protection, and a cleaner finished slab appearance.

View full details

Application

Apply E-CureĀ® after the final finishing and once bleed water has receded, using a sprayer, brush, or roller for application, with spraying yielding the best results. Application temperatures should range from 40Ā°F to 90Ā°F. To avoid residue or white crystals from over-application, immediate cleaning with water and a squeegee is recommended. Metal, glass, painted, and brick surfaces should be protected from E-CureĀ® contact.

Packaging

Available in 55-gallon drums and 5-gallon pails.

Shelf Life

When stored in its original, sealed container, E-CureĀ® has a shelf life of two years from the manufacture date.

Coverage

For curing, hardening, and dustproofing, coverage varies by surface finish, with approximate rates provided. For hard troweled finishes, coverage is between 600-800 sq ft/gal, and for broom or float finishes, 300-400 sq ft/gal. Rough finishes have a rate of 200-300 sq ft/gal, and vertical surfaces, 400-500 sq ft/gal. The coverage can extend to 1000 sq-ft per gal on highly polished surfaces using a micro-fiber applicator.

Standards

SpecChem warrants that E-CureĀ® is free from manufacturing defects and complies with LEED V.4 requirements, as well as ASTM C 309 Type 1D, Class A & B standards. The warranty is limited to the replacement of defective products.