1 1

SpecChem Crystal Shine

SpecChem Crystal Shine

REQUEST QUOTATION

Contractor Overview

Crystal Shine is a concrete sealer or water repellent. High-gloss lacquer-based sealer Crystal Shine is a high-quality lacquer sealer designed for both interior and exterior use. It enhances the beauty and shine of decorative concrete surfaces, including exposed aggregate, stained concrete, walkways, swimming pool decks, and walls, providing them with a long-lasting protective finish.

Best For

  • Walls
  • Decorative Concrete

Key Features

  • VOC regulations in various regions, including OTC/LADCO/MRPO and SCAQMD
  • Concrete surface protection
  • Supports appearance and durability goals

Material & Application Notes

It enhances the beauty and shine of decorative concrete surfaces, including exposed aggregate, stained concrete, walkways, swimming pool decks, and walls, providing them with a long-lasting protective finish. This product not only safeguards the concrete against dirt, stains, and liquid contaminants but also against de-icing salts, ensuring the surface’s integrity. Formulated with an exclusive solvent blend, Crystal Shine offers fast-drying capabilities similar to solvent-based sealers while remaining compliant with VOC regulations in various regions, including OTC/LADCO/MRPO and SCAQMD.

Why Contractors Choose It

Contractors choose Crystal Shine when the slab or surface needs protection, appearance control, and a sealer matched to exposure conditions.

View full details

Application

Surface Preparation:The concrete surface must be clean and devoid of any materials that could hinder the adhesion of Crystal Shine, including existing sealers or standing water.

Application on Fresh Concrete:For optimal coverage, Crystal Shine should be applied via spray between 250-350 square feet per gallon. A hand-held pump-up sprayer or an airless industrial sprayer is recommended. Roller application is possible with a short nap, solvent-resistant sleeve; however, ensure to avoid creating air bubbles.

For Enhanced Gloss:On porous surfaces or when a higher gloss finish is desired, apply an additional coat at 400 square feet per gallon after the first coat has dried for 1-3 hours and is touch-dry.

Packaging

  • 55 gallon drums (208.2 L)
  • 5 gallon pails (18 L)
  • 1 gallon cans (3.8 L) sold in cases of four

Shelf Life

2 years from the date of manufacture in its original, tightly sealed container. Avoid contamination with water or dirt.

Standards

Meets Federal AIM rule VOC requirements and regional standards in OTC/LADCO/MRPO/SCAQMD regions, with a VOC content of less than 100 g/l.