Biodegradable Water-Based Form Release Concentrate
Bio-Strip WB Concentrate is a 100% biodegradable, chemical release agent emulsion concentrate. When diluted properly with water (4 to 1), it provides an effective release, making it ideal for environmentally sensitive areas like bridge formwork over rivers or potable water reservoirs. It ensures easy release from various surfaces such as wood, steel, aluminum, and elastomeric liners, leaving a bondable architectural concrete surface.
For optimal results,Bio-Strip WB Concentrateshould be diluted and mixed properly, then applied with a sprayer, brush, or roller in a thin, uniform film to a clean form surface. The most effective method is spray application. Avoid ponding or puddling.
Application Rates by Material
Steel, Plastic, Fiberglass:1,500 sq ft/gal
Aluminum, HDO Plywood:1,500 sq ft/gal
Elastomeric Form Liners:1,500 sq ft/gal
MDO Plywood:1,000 sq ft/gal
Urethane Coated Plywood:1,000 sq ft/gal
Coated Paper Forms:1,000 sq ft/gal
Dimensional Lumber:750 sq ft/gal
Rough Sawn Lumber:750 sq ft/gal
Striated Plywood:750 sq ft/gal
Mixing Instructions
Stir slowly and thoroughly before each use using slow-speed mixing equipment. Dilute with4 parts clean, potable water to 1 part concentrate. Mix well before every use.
Packaging
Available in 275-gallon totes, 55-gallon drums, and 5-gallon pails.
Shelf Life
One year from the date of manufacture, when stored in the original tightly closed containers.
Standards
MeetsCorps of Engineers CEGS-03300, Section 10.8 Form Coating
Complies withNavy Dock and Piers 56359
100% Biodegradable
Cleaning
Application equipment can be easily cleaned with water.
Choosing a selection results in a full page refresh.