{"product_id":"makita-grh08z","title":"Makita GRH08Z — 40V max XGT® Brushless Cordless 1-3\/16\" SDS-PLUS AVT® Rotary Hammer, AFT®, AWS® Capable, Tool Only","description":"\u003cp\u003e40V max XGT® Brushless Cordless 1-3\/16\" AVT® Rotary Hammer accepts SDS-PLUS bits, AFT®, AWS® Capable (model GRH08Z) is a cordless concrete solution designed for heavy-load applications. It delivers the power, speed, and run-time for corded demands, without the cord.\n\nThe GRH08Z is powered by a 40V max battery with a Makita-built brushless motor that combine to deliver the power and performance required for heavy-load applications. It can deliver up to 135 of 3\/8\" holes using a fully charged 40V XGT® 4.0Ah battery*. The variable speed dial and trigger enables the user to match the speed to the application. \n\nThis hard-hitting performance is combined with advanced comfort and convenience features including Active Feedback-Sensing Technology (AFT®), which electronically turns off the motor if bit rotation is suddenly forced to stop. It is also equipped with Anti-Vibration Technology (AVT®) for reduced vibration. More than just a padded handle, AVT is an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration. In addition, the vibration-absorbing back handle and side handle are engineered to further reduce vibration. For added durability in harsh job site conditions, Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance.\n\nThe GRH08Z has dust extraction capability (sold separately) and is OSHA Table 1 compliant with an on-board HEPA Dust Extractor or stand-alone AWS® Extractor options. For added efficiency, the Rotary Hammer is equipped with Auto-Start Wireless System (AWS®), which uses Bluetooth® technology for wireless power-on and power-off communication between the equipped tool and dust extractor (sold separately). Once connected via AWS, the AWS-equipped dust extractor will automatically power on or off when the AWS-equipped cordless tool starts or stops, running only when the tool is in use. This increases productivity on a single charge and reduces continuous noise at the job or work site.\n\nConstant speed control automatically applies additional power under load for optimum performance. The torque limiting clutch is engineered to prevent gear damage by automatically disengaging the gears if the bit binds, and constant speed control automatically adds power to the motor to maintain speed under load to complete the most demanding jobs.\n\nAdditional performance features include an electric brake, a built-in L.E.D. light, and an ergonomic soft-grip handle with a large 2-finger trigger that provides increased comfort on the job. It also features a retractable hook that allows the tool to be secured when not in use. \n\nIt has 3-modes of operation for \"Rotation Only\", \"Hammering with Rotation\" or \"Hammering Only\" for multiple applications. The GRH08Z is ideal for a range of trades including mechanical\/electrical\/plumbing contractors, concrete contractors, road and bridge contractors, utility workers, pest control, maintenance operations, and more. It accepts SDS-PLUS bits.\n\nXGT is a system of equipment, tools, batteries and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.\n\n*Tested 2-3\/8\" deep holes in 5,000 PSI concrete\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOUTPOWER: Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power and performance required for heavy-load applications\u003c\/li\u003e\n\u003cli\u003eOUTSMART: Constant speed control automatically applies additional power under load for optimum performance\u003c\/li\u003e\n\u003cli\u003eOUTLAST: Overload protection is designed to protect the motor from burnout in abnormally high torque situations\u003c\/li\u003e\n\u003cli\u003eXGT® technology delivers up to 135 of 3\/8\" holes using a fully charged 40V XGT® 4.0Ah battery*\u003c\/li\u003e\n\u003cli\u003eActive Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop\u003c\/li\u003e\n\u003cli\u003eAnti-Vibration Technology (AVT®) is an internal counterbalance system along with vibration-absorbing handles that work together to reduce vibration\u003c\/li\u003e\n\u003cli\u003eDust extraction capability with OSHA Table 1 compliant on-board HEPA Dust Extractor or stand-alone AWS® Extractor options\u003c\/li\u003e\n\u003cli\u003eAuto-Start Wireless System (AWS®) which utilizes Bluetooth® technology for wireless power-on\/off communication between tool and dust extractor (AWS® Transmitter sold separately)\u003c\/li\u003e\n\u003cli\u003eElectric brake allows the tool to be repositioned faster for maximum productivity\u003c\/li\u003e\n\u003cli\u003eTorque limiting clutch engineered to prevent gear damage by automatically disengaging gears during a bind-up situation\u003c\/li\u003e\n\u003cli\u003eVariable speed dial and trigger enables user to match the speed to the application\u003c\/li\u003e\n\u003cli\u003eBuilt-in L.E.D. light with an independent on\/off illuminates the work area\u003c\/li\u003e\n\u003cli\u003eErgonomic soft-grip handle and large 2-finger trigger provide increased comfort on the job\u003c\/li\u003e\n\u003cli\u003e3-mode operation for \"Rotation Only\", \"Hammering with Rotation\" or \"Hammering Only\" for multiple applications\u003c\/li\u003e\n\u003cli\u003eRetractable tool hook secures the tool when not in use\u003c\/li\u003e\n\u003cli\u003eExtreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions\u003c\/li\u003e\n\u003cli\u003eThe digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications\u003c\/li\u003e\n\u003cli\u003eThe digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating\u003c\/li\u003e\n\u003cli\u003eXGT® Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands\u003c\/li\u003e\n\u003cli\u003eXGT® Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications (batteries not included)\u003c\/li\u003e\n\u003cli\u003eThe XGT® Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging (charger not included)\u003c\/li\u003e\n\u003cli\u003eThe XGT® Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%)\u003c\/li\u003e\n\u003cli\u003eThe XGT® Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging\u003c\/li\u003e\n\u003cli\u003eCompatible with Makita® 40V max XGT® Lithium-Ion Batteries\u003c\/li\u003e\n\u003cli\u003eOnly use genuine Makita batteries and chargers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax. Capacity (concrete drilling)\u003c\/th\u003e\n\u003ctd\u003e1-3\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOptimum Range (concrete drilling)\u003c\/th\u003e\n\u003ctd\u003e3\/16\" - 3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eImpact Energy (ft.lbs.)\u003c\/th\u003e\n\u003ctd\u003e2.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eImpact Energy (Joules)\u003c\/th\u003e\n\u003ctd\u003e3.9 J\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBlows Per Minute (variable speed)\u003c\/th\u003e\n\u003ctd\u003e0 - 4,500 BPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNo Load Speed (variable speed)\u003c\/th\u003e\n\u003ctd\u003e0 - 840 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVibration Control\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMax. Capacity (concrete drilling w\/ core bit)\u003c\/th\u003e\n\u003ctd\u003e3-1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBind-Up Control\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVibration (m\/s²)\u003c\/th\u003e\n\u003ctd\u003e9.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSystem\u003c\/th\u003e\n\u003ctd\u003e40V max XGT®\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAutomatic-start Wireless System (AWS®)\u003c\/th\u003e\n\u003ctd\u003eCapable (transmitter sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBit Type\u003c\/th\u003e\n\u003ctd\u003eAccepts SDS-PLUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e15-5\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNet Weight (with battery)\u003c\/th\u003e\n\u003ctd\u003e10.1 lbs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower Type\u003c\/th\u003e\n\u003ctd\u003eCordless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShipping Weight\u003c\/th\u003e\n\u003ctd\u003e12.35 lbs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIncluded Accessories\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSide Handle Assembly (126882-3)\u003c\/li\u003e\n\u003cli\u003eGrease (194683-7)\u003c\/li\u003e\n\u003cli\u003eCloth Towel (443122-7)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eManufacturer Resources\u003c\/h3\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.makitatools.com\/products\/details\/GRH08Z\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMakita GRH08Z product details and documentation\u003c\/a\u003e\u003c\/p\u003e","brand":"Makita","offers":[{"title":"Default Title","offer_id":67725523026210,"sku":"GRH08Z","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/5712\/2594\/files\/Makita_20GRH08Z_20Product_20Shot.jpg?v=1793914225","url":"https:\/\/procontractorsupplyinc.com\/products\/makita-grh08z","provider":"ProContractor Supply","version":"1.0","type":"link"}